Instructions for installing iPAS on Windows Vista

[Pyware Tech Support]

To install properly on Vista you will need to change a few setting temporarily.

1) Change the appearance to Windows Standard.
a. Right Click on the Desktop and choose Personalize.
b. Click on Window Color and Appearance
c. Click on Open classic appearance options
d . Choose the Windows Standard Color Scheme and press apply (Keep this window open or minimized so that you may return your scheme to the Windows Aero once the installation is done.)

2) Change the compatibility mode for the installer.
a. Locate the installer either on the disk or hard drive.
b. Right Click on the installer choose properties.
c. Click on the Compatibility tab
d. Check the box that says Run this program in compatibility mode for Windows XP Service Pack 2

3) Run the program as the administrator
a. Right Click on the installer and choose Run as Administrator

4) Follow the installation prompts and the program should install properly.

5) Once installed change your windows theme back to Windows Aero or Windows Vista Basic.